|Elevation Lift Control System
The Elevation lift control system consists of a number of distributed board-level units which are organized in a EIA(RS)485 multidrop network and process the lift installation inputs in controlling the overall lift operation.
It consists of the following units:
- The machine room unit (ElevationBase) which handles safety and local automation in controlling lift motion and car door operation. In addition it controls system back-up and car evacuation operations in the absence of line power.
- The car unit (ElevationCar) which processes and communicates all car signals and transport demands to the ElevationBase unit and controls car door, fan and light activity.
- The floor unit (ElevationFloor) which processes and communicates all floor level signals and transport demands to the ElevationBase unit and controls the floor level indication and call activity.
All system inputs are fully protected against overvoltages and reverse polarity connection. Each input signal is processed by a noise rejecting DSP filter and its logic state (positive/negative logic) is specified at the unit operation parameters. Finally, all 24 VDC outputs are protected against overvoltages, reverse polarity connection, reverse load current and inductive spikes.
Download pdf leaflet, request further information or a quote/offer
Cognito Quam Electrotechnologies Ltd
22 Pigis Ave., Melissia, Athens, 15127 Greece.
Interested in representing, distributing and promoting Cognito Quam products? Click here.
All rights reserved. Copyright © 2000-2020 Cognito Quam Electrotechnologies Ltd.
Page Keywords: Motion Control, Position Control, Servo Control, Motor Control, Robotic Control, Positioning Control & Drive.